Muzata 20Pairs Cable Railing Hardware Swage Toggle Turnbuckle CK07

This cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust freely from the max length of 10.1 inch to the min length of 6.8 inch

20 pcs turnbuckles, 20 pcs terminals, 80 pcs screws, 1 pc bent wrench. With 2 can pull a cable, you can make up to 20 cable runs spanning a maximum of 30 ft between two end posts. Post spacing should not exceed 4 ft and cable spacing should not exceed 4 inch. If the distance between end posts is over 30 ft, or if there are corners or angle changes, a new installation with another cable railing kit is required to e…

This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable range makes installation easier, especially for beginners, who might not cut the cable to the precise length. You can use a steel rod, like an allen wrench (not included), alongside the bent wrench to assist in tightening the turnbuckle for a labor-saving installation. Apply for both w…

To help you build a cost-effective WoodEasy cable railing system more efficiently, we recommend the following product combinations from Muzata, including 1/8" toggle turnbuckle MUZATA CK07, level and angled protector sleeve (CR13 level,CR70 30°), 1/8" wire rope WR02, hydraulic crimper with cable cutter CK12, drill guide CT24

We make home renovation simple, seamless, and budget-friendly with premium products and expert installation guidance. Planning a custom project or need layout advice? Our team is always here to help you complete your project with confidence